Home / Speakers / Home Theatre Speakers / Krix MX20 Modular Theatre System

Krix MX20 Modular Theatre System

$14,995

SKU: 7ad6935261f5 Category:

Interested in this product? Call us on (08) 81225652 or message us here

During our last visit to the Krix factory south of Adelaide, we had the pleasure to sit in their Theatre room and get thoroughly pounded to within an inch of our lives by the ridiculous MX-40 System.

As a kid I would watch Dr Who on a 10’’ black and white TV. A quick trip in the Tardis and now here is this behemoth setup of mind blowing capability. It’s incredible how far home entertainment has travelled. 

The effect of the immersive soundscape is not unlike being on some kind of a ride at the Royal Adelaide Show. One that tips you upside down, rolls you sideways and empties the loose change from your pants. But this ride is actually good, really, really good. 

For those who have or are planning a dedicated Theatre room, there is nothing that you will want for with the MX-40. It will outperform your local commercial cinema hands down. Tuned for optimal seating position you will be pulling Spiderman’s webs off the back of your head for days. 

Krix has a serious range to consider too. Besides the MX range there is the smaller room option in the SX range. And the X range for cavernous spaces. Plenty of spec options to suit varying budgets. 

To have an Australian developer, manufacturer and installer here in Adelaide is absolute gold. The care and passion behind Krix is admirable and I cannot imagine a better Theatre System.

or a wall of sound that plunges through the big screen, the MX-20 will provide the impact you’re looking for. With every aspect optimised to deliver the most faithful reproduction of movie soundtracks, from a whisper to the explosion immediately after, these modules provide a true commercial cinema experience at home.

The MX-20 is designed for cinema rooms four to seven metres long. This system comprises five modules, all of which are the same height and a slim line depth of just 295mm for simple installation into a wall cavity. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance.

The main speakers feature a 255mm mid-bass driver which has a 50mm voice coil developed to offer low harmonic distortion, especially in the critical midband.

The high frequency drive unit is a damped, high power, 26mm doped fabric dome tweeter, coupled with a proprietary Krix waveguide, for optimum dispersion over the entire working bandwidth. Each subwoofer contains a large 380mm paper cone driver with a 100mm edge-wound copper voice coil, dual spider assembly, and vented magnet assembly.

For the ultimate cinema experience at home, play it through Krix.

SPECIFICATIONS

LCR SPEAKER MODULES

Frequency range
40Hz-20kHz in room response

Power handling
100 – 500 Watts RMS recommended amplifier power

Sensitivity
97dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Input terminals
Gold plated spring terminals

Dimensions
1220mm high x 365mm wide x 295mm deep (2210mm wide including subwoofer modules)

Weight
31kg each

SUBWOOFER MODULES

Frequency range
25Hz-200Hz in room response

Power handling
200 – 1400 Watts RMS recommended amplifier power

Sensitivity
96dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 380mm (15”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly

Input terminals
High level gold plated spring terminals

Dimensions
1220mm high x 550mm wide x 295mm deep (2210mm wide including LCR modules)

Weight
45kg each

SYSTEM RECOMMENDATIONS

Recommended room depth
4m – 7m

Minimum screen size 16:9
105″ (2324mm x 1308mm)

Minimum screen size 21:9
130″ (3035mm x 1301mm)

0/5 (0 Reviews)

Contact Us About This Product

To find out more about this product - call us on (08) 81225652

Shopping Cart